HPE Storage Users Group https://3parug.com/ |
|
eventlog flooding https://3parug.com/viewtopic.php?f=18&t=2683 |
Page 1 of 1 |
Author: | gkourv [ Thu Oct 12, 2017 8:43 am ] |
Post subject: | eventlog flooding |
Hello all, running showeventlog shows thousands of messages like the following: We are running 8200 with 3.2.2.530 (MU3) Time : 2017-10-12 16:40:41 EEST Severity : Informational Type : Command executed Message : {3paradm super all {{0 8}} -1 192.9.201.113 11316} {setcurrentdomain -} {} Time : 2017-10-12 16:40:42 EEST Severity : Informational Type : Command executed Message : {3paradm super all {{0 8}} -1 192.9.201.113 11316} {startprog 0 ifconfig fcnet2} {} Time : 2017-10-12 16:40:42 EEST Severity : Minor Type : Command error Message : {3paradm super all {{0 8}} -1 192.9.201.113 11316} {Command: startprog 0 ifconfig fcnet2 Error: user permission denied} {} Time : 2017-10-12 16:40:46 EEST Severity : Minor Type : Command error Message : {3paradm super all {{0 8}} -1 192.9.201.114 11212} {Command: getrcopy targets Error: Error: This system is not licensed for Remote Copy.} {} Time : 2017-10-12 16:40:49 EEST Severity : Minor Type : Command error Message : {3paradm super all {{0 8}} -1 192.9.201.113 5849} {Command: getrcopy targets Error: Error: This system is not licensed for Remote Copy.} {} We haven't enabled remote copy ony any of our volumes so why is this happening? Thanks, George |
Author: | MammaGutt [ Fri Oct 13, 2017 5:09 am ] |
Post subject: | Re: eventlog flooding |
Could 192.9.201.113 and 192.9.201.114 be SSMC installations? These are the two IP addresses polling these commands. SSMC will do a lot of REST get commands to poll the current status of the system. |
Author: | gkourv [ Fri Oct 13, 2017 5:22 am ] |
Post subject: | Re: eventlog flooding |
gkourv wrote: Hello all, running showeventlog shows thousands of messages like the following: We are running 8200 with 3.2.2.530 (MU3) Time : 2017-10-12 16:40:41 EEST Severity : Informational Type : Command executed Message : {3paradm super all {{0 8}} -1 192.9.201.113 11316} {setcurrentdomain -} {} Time : 2017-10-12 16:40:42 EEST Severity : Informational Type : Command executed Message : {3paradm super all {{0 8}} -1 192.9.201.113 11316} {startprog 0 ifconfig fcnet2} {} Time : 2017-10-12 16:40:42 EEST Severity : Minor Type : Command error Message : {3paradm super all {{0 8}} -1 192.9.201.113 11316} {Command: startprog 0 ifconfig fcnet2 Error: user permission denied} {} Time : 2017-10-12 16:40:46 EEST Severity : Minor Type : Command error Message : {3paradm super all {{0 8}} -1 192.9.201.114 11212} {Command: getrcopy targets Error: Error: This system is not licensed for Remote Copy.} {} Time : 2017-10-12 16:40:49 EEST Severity : Minor Type : Command error Message : {3paradm super all {{0 8}} -1 192.9.201.113 5849} {Command: getrcopy targets Error: Error: This system is not licensed for Remote Copy.} {} We haven't enabled remote copy ony any of our volumes so why is this happening? Thanks, George You are right MammaGut, these IP's belong to SSMC hosts. Is there a way to disable this? Thanks, G. |
Author: | MammaGutt [ Fri Oct 13, 2017 1:09 pm ] |
Post subject: | Re: eventlog flooding |
Remove the 3PARs from SSMC...... SSMC needs to issues these commands to verify the current status so it always detects changes that may have been done outside SSMC or on another SSMC instance. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |