I have 2 degraded disks in different cage and magazine that i want to replace with new ones. Both of them fails to move 1 chanklet and loops trying to move it.
mc3par-f400-1 cli% servicemag status -d
Cage 3, magazine 4: The magazine is being brought offline due to a servicemag start. The last status update was at Wed Aug 30 15:28:15 2017. Chunklets relocated: 1006 in 49 minutes and 11 seconds Chunklets remaining: 1 Chunklets marked for moving: 1 Estimated time for relocation completion based on 2 seconds per chunklet is: 2 seconds The cumulative output so far is: servicemag start -pdid 26 ... servicing disks in mag: 3 4 ... normal disks: ... not normal disks: WWN [2000B4525358D703] Id [26] diskpos [0] ... relocating chunklets to spare space... ... chunklet 26:2139 - move_error,move_failed, failed move ... 1 chunklets - move_error,disk_relocating, will retry ... chunklet 26:2139 - move_error,move_failed, failed move ... 1 chunklets - move_error,disk_relocating, will retry ... chunklet 26:2139 - move_error,move_failed, failed move ... 1 chunklets - move_error,disk_relocating, will retry ... chunklet 26:2139 - move_error,move_failed, failed move ... 1 chunklets - move_error,disk_relocating, will retry
My question is can i just remove the drive without causing any damage on the system? or is there a procedure i can follow to manually move the chunklet and fail the drive so i can remove it safely.
Once remove is there another procedure for the replacement drive or the system will just automatically resume rebuilding the new drive.
Thank you for the assistance
|