HPE Storage Users Group https://3parug.com/
P87 Problems? https://3parug.com/viewtopic.php?f=18&t=2617	Page 1 of 1

---

Author:	cali [ Wed Aug 16, 2017 2:04 pm ]
Post subject:	P87 Problems?
Anyone Else have Problems after P87? It add Security, but after aplying "admithw" it did no longer run successful. Test it on a Second 3PAR, is Same. Open a Case, but they have on Idea. HPE say there Test is OK, but I think they dont use User 3Paradm. Starting in SPOCC as Command: admithw : Permission denied Starting in SSH: 3PAR04 cli% admithw Checking nodes... .... Checking if the rights assigned to extended roles need to be updated... Permission denied

---

Author:	aberus [ Sat Aug 19, 2017 10:56 am ]
Post subject:	Re: P87 Problems?
I've never experienced something like this before but I guess it's always possible that something could have happened to the user account or possibly even the ACL. The test both you could try this. Create a new user and grant it the "super" role. "createuser <username> all super" SSH into the array with that account and try to run admithw, if it works then the 3paradm account has an issue, if it still fails modify the account and grant it the "service" role. Close your SSH session and log back in using 3paradm then type in "removeuser <username>" "createuser <username> all service" SSH back into the array as the user and run admithw again. If it still fails then I'm at a loss. Don't forget to delete the account when you are finished.

---

Author:	aberus [ Sat Aug 19, 2017 11:56 am ]
Post subject:	Re: P87 Problems?
I was deploying P80 and P85 on my TEST array today and I wasn't planning on applying P87 because I am not experiencing the issue as described in the release notes but because I was curious I downloaded it and installed it. cli% showversion -a -b Release version 3.2.2.612 (MU4) Patches: P56,P58,P59,P60,P73,P80,P85,P87 cli% starttask admithw -ni Started "admithw -ni" as Task 12411 cli% showtask -d 12411 ... 2017-08-19 12:47:11 EDT Updated Checking if system scheduled tasks need to be created... 2017-08-19 12:47:11 EDT Updated 2017-08-19 12:47:11 EDT Updated Checking if the rights assigned to extended roles need to be updated... 2017-08-19 12:47:11 EDT Error Permission denied 2017-08-19 12:47:11 EDT Error Task exited with status 1 2017-08-19 12:47:11 EDT Failed Could not complete task. I am now also having the same issue as you so it is definitely a patch issue! So I created a new user p87test with the super role and cli% createuser p87test all super Password for user p87test: Retype password for user p87test: User created Same result as above, so I repeated with create the user as "service" and it also failed. What's interesting is that if you just run "admithw -ni" it completes, it just fails when trying to run it as a task. See if you are able to run it normally and if you are get a hold of HPE and have them focus on running this as a task as it fails when "checking if the rights assigned to extended roles need to be updated". Here are my results when running it manually and NOT as a task.: cli% admithw -ni Checking nodes... Checking volumes... Checking system LDs... Checking ports... Checking state of disks... Checking for drive table upgrade packages Checking cabling... Checking cage firmware... Checking if this is an upgrade that added new types of drives... Checking for disks to admit... Checking for drive table upgrade packages 0 disks admitted Checking admin volume... Admin volume exists. Checking if logging LDs need to be created... No new logging LDs need to be created Checking if preserved data LDs need to be created... No new preserved data LDs need to be created Checking if system scheduled tasks need to be created... Checking if the rights assigned to extended roles need to be updated... No need to update extended roles rights. Rebalancing and adding FC spares... FC spare chunklets rebalanced; number of FC spare chunklets increased by 0 for a total of 816. Rebalancing and adding NL spares... NL spare chunklets rebalanced; number of NL spare chunklets increased by 0 for a total of 6688. Rebalancing and adding SSD spares... No SSD PDs present System Reporter data volume exists. Checking fibre channel ports configuration... Checking system health... Checking alert Checking ao Checking cabling Checking cage Checking cert Checking dar Checking date Checking file Checking fs Checking host Checking ld Checking license Checking network Checking node Checking pd Checking pdch Checking port Checking qos Checking rc Checking snmp Checking task Checking vlun Checking vv Checking sp Component --------Summary Description-------- Qty Alert New alerts 4 File Filesystems which are over 80% full 1 License Licenses which have expired 1 pdch LDs with chunklets on a remote disk 14 Port Unavailable host ports 1 Task Failed Tasks 2 ------------------------------------------------- 6 total 23

---

Author:	mastrboy [ Tue Sep 26, 2017 7:42 am ]
Post subject:	Re: P87 Problems?
Patch 92 for 3.2.2 MU4 just came out, which obsoletes Patch 87. Has anyone tried it? And does it solve the Patch 87 issue mentioned here? Release notes: http://h20565.www2.hpe.com/portal/site/ ... cachetoken

---

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/