HPE Storage Users Group https://3parug.com/ |
|
3PAR F200 - Unable to communicate with Cage1 https://3parug.com/viewtopic.php?f=18&t=1074 |
Page 1 of 1 |
Author: | chrroy [ Tue Dec 16, 2014 11:06 am ] |
Post subject: | 3PAR F200 - Unable to communicate with Cage1 |
We have a cage that was running fine and just went crazy yesterday ... we didnt upgrade or try to do anything is particular When we run the following command checkhealth cage1 .. we get this ... Component ---------------Description--------------- Qty Cage Degraded or failed cage power supplies 2 Cage Degraded or failed cage power supply fans 2 Cage Cages not on current firmware 1 Cage Degraded or failed cage AC power 2 vlun Paths not reported by host agent 16 Component ---------------Identifier--------------- ---------------------Description---------------------- Cage cage:1 Firmware is not current Cage cage:1 Power supply 0's fan is Cage cage:1 Power supply 0 is Cage cage:1 Power supply 0's AC state is Cage cage:1 Power supply 1's fan is Cage cage:1 Power supply 1 is Cage cage:1 Power supply 1's AC state is We also get some alarm going on that cage with leds flashing on the OPs Panel System fault LED is steady Amber Power supply/Cooling LED is Amber and Blinking 2 Gb Link Speed Link is Green but blinking The Hub Mode LED is Green but Blinking I'm swimming in the dark! Did i just lost a complete CAGE of Disk? |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |